GSK980MDa can control five feeding axes(including C axis),two analog spindles,2ms interpolation in high speed,0.1μm precision,which obviously improve the efficiency, precision and surface quality of processing parts.New USB interface,it supports the file operation and program running in flash disk.It provides 26 cycle commands of rigid tapping,drilling,boring,milling,etc.It supports the macro command in sentence type and calls the macro program with parameter.The command function is powerful,convenient and flexible programming.
The five axes of X, Z, Y, 4th and 5th control, any three axes l inkage movement, the axial name and the axial type of 4th and 5th can be defined.
2ms interpolation cycle, the precision of 1μm or 0.1μm can be selected.
Maximum speed: 60m/min （When it is 0.1μm, the maximum speed is 24m/min）
Multiple functions, it can real ize the dri l l ing/boring, roughing of round groove/rectangle groove, finishing of ful l circle/rectangle, continuous dri l l ing of straight line/rectangle/arc, etc.
Adapted servo spindle can real ize spindle continuous position, rigid tapping function.
Bui lt-in many PLC programs, current running PLC programs can be selected.
Memory capacity: 40M, total 10,000 part programs.
Support macro command programming in sentence type and the cal l ing of macro program with the Parameter.
Support metric system/inch system, with the function of auto chamfering and tool life management.
Display in Chinese, Engl ish, Spanish, and Russian, which can be selected by the parameter.
With USB interface, support USB fi le processing, system configuration and software upgrade.
DNC in high speed, real ize part program real-time transmission processing .
Analog voltage output of 0V～10V in two channels, support two-spindle control.
One channel for handwheel, supporting external MPG.
Common input in 40 points/output in 32 points.
Control axes: 5 axes （X, Z, Y, 4th and 5th）
Interpolation axes: X, Y, Z, 4th and 5th linear interpolation; X,Y and Z three axes linear and spiral interpolation, any two axes arc interpolation;
PLC control axes: 5 axes
Feeding axis function
Minimum command unit: 0.001mm or 0.0001mm can be selected
Position command range: ±99999999 × minimum command unit
Rapid traverse speed: When the command unit is 0.001mm, the maximum speed is 60m/min; 0.0001mm, the maximum speed is 24m/min.
Rapid override: F0, 25%, 50% and 100%, total four levels, real-time adjustment;
Feeding override: total 16 levels: 0～150%, real-time adjustment;
Interpolation mode: linear, arc and spiral interpolation and rigid tapping
Acceleration and deceleration function
Cutting feeding: Acceleration or deceleration in linear type/index type or front/rear is selectable.
Rapid traverse: Acceleration or deceleration in linear type/index type or front/rear is selectable.
Tapping: Acceleration or deceleration in linear type/index type or front/rear is selectable.
The starting speed, finishing speed and time of acceleration and deceleration are set by the parameter.
Analog voltage 0V～10V output in two channels, support two-spindle control
Spindle encoder feed back in one channel, the resolution of spindle encoder can be set (0 or 100p/r～5000p/r)
Transmission ratio between encoder and spindle is:（1～255）:（1～255）
Spindle speed: It is specified by S code or PLC signal, the speed range is 0rpm～9999rpm.
Spindle override: total 8 levels: 50%～120%, real-time adjustmen
Spindle constant surface speed control
Tapping cycle/rigid tapping
Tool length compensation
Tool radius compensation (C type)
Tool wearing compensation
Tool life management
Pitch error compensation in memory type
PLC program in two levels, maximum 5,000 steps, the refresh cycle of the 1st level program: 8ms.
PLC program communication download
Support PLC warning and PLC alarm
Support many PLC programs (maximum 16), the current running PLC program can be selected
Basic I/O: input in 40 points/output in 32 points
7.4″large screen LCD, the resolution is 234×480
Display in Chinese, English, Spanish or Russian, etc
Display in processing path and it can real-time zoom in and out, translation and scroll lock.